Black & Decker MULTI-GAS DETECTORS Manual de usuario descargar pdf (Pagina 24)

GasAlertMax

User Manual

Self-Test Pass

If the detector passes the self-test, the detector begins

normal operation. The LCD displays the ambient gas

readings.

The detector starts recording the maximum gas exposure

(MAX) and calculating the short-term exposure level (STEL)

and time-weighted average (TWA) exposures.

Self-Test Fail

If the detector fails the self-test, refer to the

Troubleshooting section.

Deactivating the Detector

To deactivate the detector, press F and hold for 5

seconds.

The audible alarm beeps four times, the visual alarm flashes

four times, and then the LCD displays the following:

The LCD deactivates and the detector stops normal

operation.

Note

If F

is held down for less than 5 seconds, the

detector will not shutdown.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 71 72

Sin comentarios

Black & Decker MULTI-GAS DETECTORS Manual de usuario Pagina 24