Black & Decker Cordless Drill Manual de servicio descargar pdf (Pagina 4)

ENGLISH

c. Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Battery tool use and care

a. Ensure the switch is in the off position before

inserting battery pack. Inserting the battery pack into

power tools that have the switch on invites accidents.

b. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

c. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

d. When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

e. Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is

maintained.

ADDITIONAL SAFETY INSTRUCTIONS FOR

AUSTRALIA AND NEW ZEALAND

a. Young children and the infirm. This appliance is not

intended for use by young children or infirm persons

without supervision. Young children should be supervised to

ensure they do not play with this appliance.

b. Replacement of the supply cord. If the supply cord is

damaged, it must be replaced by the manufacturer or an

authorised Black & Decker Service Centre in order to avoid

a hazard.

ADDITIONAL POWER TOOL SAFETY WARNINGS

Warning! Additional safety warnings for drills and

impact drills.

• Wear ear protectors with impact drills. Exposure to

noise can cause hearing loss.

• Use auxiliary handles supplied with the tool. Loss of

control can cause personal injury.

• Hold power tool by insulated gripping surfaces when

performing an operation where the cutting accessory

may contact hidden wiring.

• Cutting accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and shock

the operator.

ADDITIONAL SAFETY INSTRUCTIONS FOR

BATTERIES AND CHARGERS

Batteries

• Never attempt to open for any reason.

• Do not expose the battery to water.

• Do not expose the battery to heat.

• Do not store in locations where the temperature may

exceed 40°C.

• Charge only at ambient temperatures between 4°C and

40°C.

• Charge only using the charger provided with the tool.

• When disposing of batteries, follow the instructions

given in the section “Protecting the environment”.

• Do not damage/deform the battery pack either by

puncture or impact, as this may create a risk of injury

or fire.

• Do not charge damaged batteries.

Chargers

Your charger has been designed for a specific voltage.

Always check that the mains voltage corresponds to the

voltage on the rating plate.

• Use your Black & Decker charger only to charge the

battery in the tool with which it was supplied. Other

batteries could burst, causing personal injury and

damage.

• Never attempt to charge non-rechargeable batteries.

• If the supply cord is damaged, it must be replaced by

the manufacturer or an authorised

Black & Decker

Service Centre in order to avoid a hazard.

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Black & Decker Cordless Drill Manual de servicio Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Taladros Eléctricos Black & Decker Cordless Drill